The following are FL1 Frameless Shower Door hardware only. Glass not included.

NOTE: The frameless shower door hardware is for customers interested in purchasing only hardware and receiving glass at their local glass shop in order to stay within budgets.

PART #: GEN037 Geneva 037 Series Wall Mount Full Back Plate Standard Hinge - Used for a frameless shower door up to 24 inch wide - Many finishes are available - Door height below 72 inch Qty. 2 hinges standard - Door height above 72 inch Qty. 3 hinges required	PART #: GEN074 Geneva 074 Series Short Back Plate Wall Mount Hinge - This hinge is used for frameless shower doors with NO seal on the hinged side - Used for a frameless shower door under 24 inch wide - Many finishes are available - Door height below 72 inch Qty. 2 hinges standard - Door height above 72 inch Qty. 3 hinges required
PART #: V1E037 Vienna 037 Series Wall Mount Full Back Plate Hinge - Used for a frameless shower door up to 24 inch wide - Many finishes are available - Door height below 72 inch Qty. 2 hinges standard - Door height above 72 inch Qty. 3 hinges required	PART #: V1E074 Vienna 074 Series Short Back Plate Wall Mount Hinge - This hinge is used for frameless shower doors with NO seal on the hinged side - Used for a frameless shower door under 24 inch wide - Many finishes are available - Door height below 72 inch Qty. 2 hinges standard - Door height above 72 inch Qty. 3 hinges required
PART #: BM8X8 8 inch (BM Series) Tubular Back-To-Back Pull Handle - Fits a glass thickness of 1/4" to 1/2" - Popular pull handle for frameless doors - Many finishes are available - Many sizes are available	PART #: BM6X18 (BM Series) 6 inch Pull Handle 18 inch Towel Bar Combination with Metal Washers - Fits a glass thickness of 1/4" to 1/2" - 1-1/4" diameter metal washers - Many finishes are available - Many sizes are available
PART #: BMNW18X18 18 inch (BM Series) Back-to-Back Tubular Handle with Metal Washers - Fits a glass thickness of 1/4" to 1/2" - 1-1/4" diameter metal washers - Many finishes are available - Many sizes are available	PART #: P500BR Polycarbonate Bottom Rail With Wipe for 3/8 inch Glass - Available in 1/2", 3/8" and 5/16" thickness - Very secure seal - Use silicone for best attachment results
PART #: SDTW-1 Translucent Vinyl Edge T Wipe for 7/16 inch Gap Length 98 Inches - Fits a 3/8" thick glass - Use clear very hi-bond tape for best attachment results	PART #: P102 #10 x 2" Wall Mounting Flat Head Phillips Sheet Metal Screw - Package of 10 - Many finishes are available
PART #: EXP2007 1/4" Hole, 1-1/2" Length 10-12 Screw Expanding Plastic Screw Anchors - Popular Design - Different size options

Sam's Glass & Aluminum Works, Inc.
2403 E. Washington Blvd.
Pasadena California 91104

Email: sales@sgawinc.com
Telephone: (626) 798-1895
Fax: (626) 798-5712
Office hours are between 8:00 am and 5:00 pm PST Monday - Friday.

ABOUT US | CONTACT US | TERMS AND CONDITIONS | Website Design and Development by Gray Space Design